Alyco

Ficha técnica

1/4 DR. SLIDING TEE HANDLE 100MM

Code
192164
EAN-13
8421504921646
  • Handle with sliding drive for working in tight spaces.
  • Allows to work on fasteners with more power than with a ratchet, thanks to the option of exerting force on both ends of the handle.
  • Depending on the position of the fastener and its limitations, it can be used as an L-handle, providing very strong leverage and considerably increasing the tightening torque
  • Bar and head made of Chrome-Vanadium Steel, top-quality and wear resistant. High tightening torque, allowing force to be applied without damaging the spanner. Manufactured from heat-treated steel for increased strength and tightening capacity. High dimension accuracy ensures that the socket and nut don’t wear during tightening and extends the tool’s service life. Chrome surface treatment for durability and to prevent oxidation.
  • It can be used with 1/4" square sockets and extension bars. It can also be used with a universal joint or adaptors for optimal flexibility of use

Go to main product

Data sheet

  • Handle with sliding drive for working in tight spaces.
  • Allows to work on fasteners with more power than with a ratchet, thanks to the option of exerting force on both ends of the handle.
  • Depending on the position of the fastener and its limitations, it can be used as an L-handle, providing very strong leverage and considerably increasing the tightening torque
  • Bar and head made of Chrome-Vanadium Steel, top-quality and wear resistant. High tightening torque, allowing force to be applied without damaging the spanner. Manufactured from heat-treated steel for increased strength and tightening capacity. High dimension accuracy ensures that the socket and nut don’t wear during tightening and extends the tool’s service life. Chrome surface treatment for durability and to prevent oxidation.
  • It can be used with 1/4" square sockets and extension bars. It can also be used with a universal joint or adaptors for optimal flexibility of use

    • Overview

    T-bar made of two parts:
    The bar handle has two stoppers to prevent the sliding head from sliding off of the bar.
    Head with a circular hole for sliding along the bar and a 1/4" square drive with detent ball.
    Bar and head made of Chrome-Vanadium Steel, top-quality and wear resistant. High tightening torque, allowing force to be applied without damaging the tool.
    Manufactured from heat-treated steel for increased strength and tightening capacity. The high size accuracy ensures that the fastener doesn’t wear and extends the service life. Chrome surface treatment for durability and to prevent oxidation.
    It can be used with 1/4" sockets and socket bits. It can also be used with extension bars, universal joints, adaptors, etc. for a wide range of functions.
    It allows the torque to be increased considerably, as it’s possible to exert torque at two distant points. The torque transmission is also very secure due to the very precise attachment between the bar and the socket.
    It can be used as a T-handle, with the head in the centre, or as an L-handle, with the head at one end of the bar.
    Complies with DIN 3122 and ISO 3315 standards.
    Suitable for tightening jobs that requite great power.

    Technical characteristics

    Finishes

    Material:
    Chrome Vanadium Steel
    Finish:
    Satin matt chrome

    Certifications

    Certification:
    DIN 3123

    Product dimensions

    Weight (kg) Length (cm) Width (cm) Height (cm)
    0.0450

    Documents

    • Certification 1