1/4" Socket With Tamperproof Torx Bit ALYCO

Socket with screwdriver bit made of Chrome-Vanadium Steel, top-quality and wear resistant. High tightening torque, allowing force to be applied without damaging the bit and the screw
Manufactured from heat-treated steel for increased strength and tightening capacity. The impeccable size accuracy of the drive socket and bit ensures that the fastener doesn’t wear and extends the service life of the tool.
Chrome surface treatment for durability and to prevent oxidation.
The S2 Steel screwdriver bit attached is made of extra strong S2 Steel and is very precise for excellent tightening, without deforming the screw.
Suitable for use with 1/4" square drive ratchets, with screwdriver handles and T-handles. It can also be used with extension bars, universal joints, etc. for a wide range of functions. Using it with a ratchet greatly increases the torque compared to using it as a screwdriver.

Socket for tightening suitable for 1/4" square drive ratchet with tamperproof Torx screwdriver bit.
Allows screws to be tightened perpendicularly with a ratchet, providing a higher tightening torque than vertical tightening with a screwdriver. In addition, the perfect fit of the ratchet square drive with the socket ensures optimum tightening force transmission. This optimises efficiency and comfort.
The internal recess in the side of the socket makes for a perfect fit on the ratchet square drive, but the socket cannot be removed without pressing the quick-release button on the ratchet. This makes it easy and safe to use, as the socket can’t fall off during tightening.
It allows very precise tightening, with high force transmission, without wearing the edges.
Socket made of Chrome-Vanadium Steel, which gives it greater strength, tightening capacity and service life.
The socket is heat-treated during the manufacturing process, which gives it a higher clamping capacity, prevents cracks and extends the life of the socket.
At the end of the manufacturing process, it’s surface treated with chrome plating, which prevents corrosion and extends the life of the socket.
The modified S2 steel and an optimised heat treatment process give the bits an extra hard quality for a robust performance in any screwdriving task.
The sockets comply with DIN 3120. They are marked with our brand name and the size of the head.
These sockets are suitable for standard ratchets, screwdriver handle and T-handles.
They can be used with many accessories such as extension bars, universal joints, etc.
Ideal for tightening hexagonal screws in industrial tasks, construction, industrial maintenance and even home use. Not recommended for use with striking tools.

See characteristics

Product	Availability	Size (in mm)
1/4DR INSERTBIT SOCKET TAMPER PROOF T6 Code 192051 Technical documentation	High level	TAMPERPROOF TORX T6
1/4DR INSERTBIT SOCKET TAMPER PROOF T Code 192052 Technical documentation	High level	TAMPERPROOF TORX T7
1/4DR INSERTBIT SOCKET TAMPER PROOF T Code 192053 Technical documentation	High level	TAMPERPROOF TORX T8
1/4DR INSERTBIT SOCKET TAMPER PROOF T9 Code 192054 Technical documentation	High level	TAMPERPROOF TORX T9
1/4DR INSERTBIT SOCKET TAMPER PROOF T Code 192055 Technical documentation	High level	TAMPERPROOF TORX T10
1/4DR INSERTBIT SOCKET TAMPER PROOF T Code 192056 Technical documentation	High level	TAMPERPROOF TORX T15
1/4DR INSERTBIT SOCKET TAMPER PROOF T Code 192057 Technical documentation	High level	TAMPERPROOF TORX T20
1/4DR INSERTBIT SOCKET TAMPER PROOF T Code 192058 Technical documentation	High level	TAMPERPROOF TORX T25
1/4DR INSERTBIT SOCKET TAMPER PROOF T Code 192059 Technical documentation	Low level	TAMPERPROOF TORX T30
1/4DR INSERTBIT SOCKET TAMPER PROOF T Code 192060 Technical documentation	High level	TAMPERPROOF TORX T40