Alyco

Ficha técnica

80 MM UTILITY BENCH VICE HR

Code
171005
EAN-13
8421504710059
Width (in mm)
80
  • Bench vice ideal for holding workpieces to perform operations like cutting, filing and sanding
  • Can be easily fixed to a workbench or other fixed surface, which facilitates the operation.
  • The base allows the vice to be rotated in any position from 0 to 360 degrees, which makes working convenient by allowing the position to be changed to the most comfortable posture. A winged piston fixes the position so that it’s not altered during operation.
  • Square guide with piston opening for clamping and releasing the workpiece according to its length or thickness. For safe and comfortable work.
  • The interchangeable jaw plates prevent damage to the pressed workpiece and allow sufficient pressure to ensure that the work is carried out under optimum conditions.

Go to main product

Data sheet

  • Bench vice ideal for holding workpieces to perform operations like cutting, filing and sanding
  • Can be easily fixed to a workbench or other fixed surface, which facilitates the operation.
  • The base allows the vice to be rotated in any position from 0 to 360 degrees, which makes working convenient by allowing the position to be changed to the most comfortable posture. A winged piston fixes the position so that it’s not altered during operation.
  • Square guide with piston opening for clamping and releasing the workpiece according to its length or thickness. For safe and comfortable work.
  • The interchangeable jaw plates prevent damage to the pressed workpiece and allow sufficient pressure to ensure that the work is carried out under optimum conditions.

    • Overview

    Bench vise for placing on top of a workbench, screwed in.
    It has a swivel base, which allows it to be bolted to the workbench and the bolt can be rotated 360 degrees.
    The vice is made of steel, and is largely painted.
    The most used surfaces are chrome-plated to prevent rust.
    It has a winged piston to fix the swivel position of the base.
    Another larger piston is used to open or close the jaws according to the dimensions or shape of the workpiece to be clamped. Allows smooth opening and closing without damaging the workpiece.
    There is a chrome-plated surface that can be used for hammering as if it were a small anvil.
    The jaws feature jaw plates to avoid damaging the workpiece.
    The jaws cover width ranges of 80, 100, 125 and 150 mm, depending on the model.

    Technical characteristics

    Finishes

    Product dimensions

    Weight (kg) Length (cm) Width (cm) Height (cm)
    5.2000