Alyco

Ficha técnica

INSULATED 1/4 DR. RATCHET HANDLE 150MM

Code
190390
EAN-13
8421504903901
Ratchet size fit
1/4
  • Ratchet protected by special plastic to prevent the hand from touching the metal, protecting against electric shocks up to 1000V. With VDE standard certificate
  • Ratchet for tightening with 1/4" socket drive. The ergonomic handle provides high torques and access to hard-to-reach spaces.
  • Ratchet made of Chrome-Vanadium Steel, top-quality and wear resistant. High tightening torque, allowing force to be applied without damaging the spanner. Very accurate thanks to the 45-tooth mechanism, which allows tightening with a pitch of 8 degrees.
  • Manufactured from heat-treated steel for increased strength and tightening capacity. High dimension accuracy ensures that the socket and nut don’t wear during tightening and extends the tool’s service life.
  • Allows use with 1/4" square sockets and T-handle. It can also be used with extension bars, universal joints, adaptors, etc. for a wide range of functions. The sockets and extension bars may be insulated too.

Go to main product

Data sheet

  • Ratchet protected by special plastic to prevent the hand from touching the metal, protecting against electric shocks up to 1000V. With VDE standard certificate
  • Ratchet for tightening with 1/4" socket drive. The ergonomic handle provides high torques and access to hard-to-reach spaces.
  • Ratchet made of Chrome-Vanadium Steel, top-quality and wear resistant. High tightening torque, allowing force to be applied without damaging the spanner. Very accurate thanks to the 45-tooth mechanism, which allows tightening with a pitch of 8 degrees.
  • Manufactured from heat-treated steel for increased strength and tightening capacity. High dimension accuracy ensures that the socket and nut don’t wear during tightening and extends the tool’s service life.
  • Allows use with 1/4" square sockets and T-handle. It can also be used with extension bars, universal joints, adaptors, etc. for a wide range of functions. The sockets and extension bars may be insulated too.

    • Overview

    Ratchet for tightening with 1/4" socket drive. Insulation up to 1000v in alternating current and 1500V in direct current.
    This ratchet is made of Chrome-Vanadium Steel, which gives it greater strength, tightening capacity and service life.
    The metal part of the ratchet is heat-treated during the manufacturing process, which gives it a higher clamping capacity, prevents cracks and extends its service life.
    At the end of the manufacturing process, they are covered with a plastic protection that prevents the possible transmission of electric current that could lead to electrocution or burns.
    Ratchet for tightening with 1/4" socket drive.
    Complies with DIN3122 and ISO3315. Also complies with IEC 60900 certified by the VDE institute.
    The ratchet has a 45-tooth mechanism, so that each turning pitch is 8 degrees in circumference, for effective and precise tightening.
    It has a lever for changing the rotation direction, which makes it very practical in tight spots with reduced turning angle or confined spaces.
    The ergonomic bi-material handle allows maximum force to be exerted without hand fatigue, even during intensive repetitive use.
    The ratchet performs accurate tightening with high force transmission, without wearing the socket, which is permanently attached to the ratchet socket drive.
    The spring-loaded ball of the square drive fits into a recess in the socket to prevent accidental dropping and to keep the other hand free. By pressing the quick-release button, the ball retracts and the socket can be removed easily.
    The ratchet can be used with an extension bar, flexible extension bar and universal joint.
    Can be used with screwdriver bit adaptor for use with bits.
    The plastic protection has been certified by VDE, a German certification company, and is rated for 1000V AC and 1500V DC.
    Durable, corrosion-resistant, non-slip handle with high torque, suitable for long tasks.
    Widely used for tightening or untightening hex head bolts and nuts.
    Ideal for tightening nuts in industrial tasks, construction, industrial maintenance and even home use.
    It also provides a high level of safety for use in places or machines with a possible electrical risk.

    Technical characteristics

    Finishes

    Color:
    Red / black
    Material:
    Chrome-Vanadium Steel coated with insulating material

    Certifications

    Certification:
    EN 60900

    Product dimensions

    Weight (kg) Length (cm) Width (cm) Height (cm)
    0.1400 15.00 5.00 5.00

    Documents

    • Certification 1