Rechargeable Extra Slim Swivel Base Inspection Lamp 10W COB Ip20 ALYCO

Inspection lamp with a very elongated and powerful light that allows intense illumination in hard to reach spaces, with a range of 5 metres and an angle of 120º.
Lithium battery, with a lighting autonomy of 3 hours per charge, can be recharged in the mains or in the vehicle (USB cable)
Option of positioning the inspection lamp on any metal surface (bonnet) and directing it towards the place that needs to be illuminated (up to 5 metres away). When directing the light, the swivel base with magnet can be adjusted and the direction of the light can be fixed, allowing you to have both hands free and work without any problems.
Option of positioning the inspection lamp on any metal surface (bonnet) and redirecting it to the place to be illuminated (up to 5 metres away).
Suitable for automotive workshops, and spots that are hard to reach in workshops, even in areas without access to electricity nearby.

Inspection lamp with 10 Watt COB bulb with 400 lumen brightness.
It’s made of rigid plastic.
It has a magnetised swivel base with orientation lock, which means that it can be fixed by magnet to any metal surface (e.g. car bonnet) to direct the light towards the part you want to illuminate, leaving both hands free. it also has a hook for hanging.
It has a light dimmer, which can be adjusted between 0 and 400 lumen intensity.
The structure is extra slim, so you can illuminate areas that are hard to access.
It weighs 300 g, making it light and practical.
The light beam is 17 cm long. It’s a dimmer light with an intensity between 0 and 400 lumens. The range is 5 metres. The beam angle is 120°.
The lamp has COB (cold light) technology providing high intensity and low power consumption, so the rechargeable battery lasts longer.
The rechargeable lithium battery has a battery life of 3 hours at maximum intensity, and a charging time of 5 hours. This battery is 3.7 V and 2600 mAh.
The battery is recharged using a cable with USB power input and micro USB light output. These cables are supplied with the inspection lamp.
The inspection lamp has a dust and water protection rating of IP20 (medium dust rating, minimum water rating).
it complies with the European CE and GS electrical safety standards.
Supplied in blister pack with light and cable.

See characteristics