1/4" Dual Ratchet ALYCO
- Ratchet for tightening with 1/4" socket drive. The short ergonomic handle allows tightening in tight spaces
- Very accurate tightening thanks to the 72-tooth mechanism, which allows tightening with a pitch of 5 degrees, extremely exact
- Ratchet made of Chrome-Vanadium Steel, top-quality and wear resistant. Very precise tightening, without damaging the socket or the bit
- Manufactured from heat-treated steel for increased strength and tightening capacity. High dimension accuracy ensures that the socket and nut don’t wear during tightening and extends the tool’s service life. Chrome surface treatment for durability and to prevent oxidation
- Allows use with 1/4" square sockets and T-handle. Thanks to the screwdriver bit holder, it can be used with any type of bit (Slotted, PH, PZ, Torx, etc.). It can also be used with extension bars, universal joints, adaptors, etc. for a wide range of functions.
Dual ratchet for tightening with 1/4" male square drive and 1/4" bit socket. Short series 112 mm
This ratchet is made of Chrome-Vanadium Steel, which gives it greater strength, tightening capacity and service life.
The metal part of the ratchet is heat-treated during the manufacturing process, which gives it a higher clamping capacity, prevents cracks and extends its service life.
At the end of the manufacturing process, they’re surface treated with chrome plating, which prevents corrosion and extends the service life.
Ratchet for tightening with 1/4" socket drive. And for 1/4" socket for screwdriver bits
The ratchet has a 72-tooth mechanism, so that each turning pitch is 5 degrees in circumference, for effective and precise tightening.
It has a lever for changing the rotation direction, which makes it very practical in tight spots with reduced turning angle or confined spaces.
Adding to this versatility is the 1/4" screwdriver bit holder, allowing hexagonal nut tightening on one side and screwdriver tightening for with all types of screws, depending on the bit.
The ergonomic bi-material handle allows maximum force to be exerted without hand fatigue, even during intensive repetitive use.
The ratchet performs accurate tightening with high force transmission, without wearing the socket, which is permanently attached to the ratchet socket drive.
The spring-loaded ball of the square drive fits into a recess in the socket to prevent accidental dropping and to keep the other hand free. By pressing the quick-release button, the ball retracts and the socket can be removed easily.
The ratchet can be used with an extension bar, flexible extension bar and universal joint.
Durable, corrosion-resistant, non-slip handle, suitable for long tasks.
Widely used for tightening or untightening hex head bolts and normal nuts and screws of different kinds including slotted, PH, PZ, etc.
Ideal for tightening nuts in industrial tasks, industrial maintenance and DIY use.
This ratchet is made of Chrome-Vanadium Steel, which gives it greater strength, tightening capacity and service life.
The metal part of the ratchet is heat-treated during the manufacturing process, which gives it a higher clamping capacity, prevents cracks and extends its service life.
At the end of the manufacturing process, they’re surface treated with chrome plating, which prevents corrosion and extends the service life.
Ratchet for tightening with 1/4" socket drive. And for 1/4" socket for screwdriver bits
The ratchet has a 72-tooth mechanism, so that each turning pitch is 5 degrees in circumference, for effective and precise tightening.
It has a lever for changing the rotation direction, which makes it very practical in tight spots with reduced turning angle or confined spaces.
Adding to this versatility is the 1/4" screwdriver bit holder, allowing hexagonal nut tightening on one side and screwdriver tightening for with all types of screws, depending on the bit.
The ergonomic bi-material handle allows maximum force to be exerted without hand fatigue, even during intensive repetitive use.
The ratchet performs accurate tightening with high force transmission, without wearing the socket, which is permanently attached to the ratchet socket drive.
The spring-loaded ball of the square drive fits into a recess in the socket to prevent accidental dropping and to keep the other hand free. By pressing the quick-release button, the ball retracts and the socket can be removed easily.
The ratchet can be used with an extension bar, flexible extension bar and universal joint.
Durable, corrosion-resistant, non-slip handle, suitable for long tasks.
Widely used for tightening or untightening hex head bolts and normal nuts and screws of different kinds including slotted, PH, PZ, etc.
Ideal for tightening nuts in industrial tasks, industrial maintenance and DIY use.
Product | Availability | Ratchet size fit |
Length |
|
---|---|---|---|---|
1/4 DR. DUAL RATCHET 72 TEETH Code 192133 Technical documentation | High level | 1/4" | 110 mm |