Alyco

Ficha técnica

RATCHET 1/4' DUAL

Code
170712
EAN-13
8421504707127
Ratchet size fit Length
1/4" 105 mm
  • 1/4" short ratchet and 1/4" screwdriver bits made of Chrome-Vanadium Steel for maximum durability and wear resistance. Perfect for tightening nuts with hexagon sockets, pointed sockets and screwdriver bits.
  • The ratchet is chrome-plated to give it the best possible protection against rust. This significantly increases the durability of the ratchet and ensures a tightening capacity in excess of DIN standards over a long service life.
  • The ratchet has a precise tightening mechanism with a high tightening capacity. 72 tooth ratchet with 5º angle, to give extra strength to the ratchet teeth. The square drive has a ball that allows the socket to fit perfectly, giving great security and preventing accidental dropping.
  • Short ergonomic bi-material handle with non-slip rubber grip for ease of use, comfort and force transmission. The tightening direction reverse mechanism and the socket release button allow various tightening methods and free the hand for other tasks.
  • Can be used for tightening with hexagonal sockets, sockets with bits, extension bars, cardan, bit adaptors, etc. Wide range of versatile options. Perfect for fitters, installers, mechanics, DIY, etc.

Go to main product

Data sheet

  • 1/4" short ratchet and 1/4" screwdriver bits made of Chrome-Vanadium Steel for maximum durability and wear resistance. Perfect for tightening nuts with hexagon sockets, pointed sockets and screwdriver bits.
  • The ratchet is chrome-plated to give it the best possible protection against rust. This significantly increases the durability of the ratchet and ensures a tightening capacity in excess of DIN standards over a long service life.
  • The ratchet has a precise tightening mechanism with a high tightening capacity. 72 tooth ratchet with 5º angle, to give extra strength to the ratchet teeth. The square drive has a ball that allows the socket to fit perfectly, giving great security and preventing accidental dropping.
  • Short ergonomic bi-material handle with non-slip rubber grip for ease of use, comfort and force transmission. The tightening direction reverse mechanism and the socket release button allow various tightening methods and free the hand for other tasks.
  • Can be used for tightening with hexagonal sockets, sockets with bits, extension bars, cardan, bit adaptors, etc. Wide range of versatile options. Perfect for fitters, installers, mechanics, DIY, etc.

    • Overview

    Short ratchet (10 cm.) made of Chrome-Vanadium Steel, heat-treated and chrome-plated with a 72-teeth rotation mechanism, with a pitch every 5 degrees, for maximum precision.
    This short ratchet is useful because of its small size that makes it easy to transport and great for tightening in difficult areas.
    The ratchet has a reverse mechanism and socket release button, which give it high reliability and tightening capacity.
    In addition, the 1/4" screwdriver bit holder allows tightening with any type of bit (slotted, PH, PZ, Torx, etc.).
    Multifunctional tightening element which allows both right and left tightening.
    Precise ratchet, fits perfectly with the socket and it has a detent ball to prevent the socket from separating or falling out.
    Ergonomic, bi-material, non-slip rubber handle for easy grip, comfort and optimum transmission of force to the screws. It has a hanger at the end of the handle for storage.
    Very useful for tightening in mechanics, maintenance, installers, DIY, etc.

    Technical characteristics

    Type of tool:
    Dual ratchet 1/4" square drive on one side and adaptor for 1/4" hex socket bits on the other side
    Use:
    Used for fastening or unfastening screws by attaching sockets or accessories (extension bars, universal joints, adaptors...) with 1/4" square female conductor.
    Special features:
    Short and very light ratchet. Its main advantage is its small size and ease of transport. Due to its small size it is very suitable for reaching places that cannot be reached with standard length ratchet spanners. What’s more, direct coupling functionality for 1/4" hexagonal shank screwdriver bits.
    Number of teeth / turning angle:
    72 teeth / 5º turn per tooth
    Head size:
    Width 26 mm / height 25 mm
    Head material:
    Closed end. Internal mechanism of Chrome-Vanadium Steel
    Maximum tightening force:
    82 N.m / 8.36 Kg.m (32 % higher than DIN 62 N.m)
    Reversible:
    Yes. Easy-to-use flip reverse switch.
    Handle type:
    Hidden, as the handle reaches the head area.
    Handle grip shape:
    Oval, straight and ergonomic Large handle width of 28 mm for extra comfort.
    Handle grip material:
    Bi-material handle grip. Non-slip rubber handle
    Hole for hanging:
    Yes. Φ 10 mm hole at the end of the handle.

    Finishes

    Color:
    Orange/grey handle and grey/black body
    Material:
    Chrome vanadium steel body and bi-material handle
    Finish:
    Chrome-plated body

    Certifications

    Certification:
    DIN 3122

    Product dimensions

    Weight (kg) Length (cm) Width (cm) Height (cm)
    0.1100 10.50 2.50 2.50

    Documents

    • Certification 1