Steel Bench Vice With Square Guide ALYCO ORANGE
- Bench vice ideal for holding workpieces to perform operations like cutting, filing and sanding
- Can be easily fixed to a workbench or other fixed surface, which facilitates the operation.
- The base allows the vice to be rotated in any position from 0 to 360 degrees, which makes working convenient by allowing the position to be changed to the most comfortable posture. A winged piston fixes the position so that it’s not altered during operation.
- Square guide with piston opening for clamping and releasing the workpiece according to its length or thickness. For safe and comfortable work.
- The interchangeable jaw plates prevent damage to the pressed workpiece and allow sufficient pressure to ensure that the work is carried out under optimum conditions.
Bench vise for placing on top of a workbench, screwed in.
It has a swivel base, which allows it to be bolted to the workbench and the bolt can be rotated 360 degrees.
The vice is made of steel, and is largely painted.
The most used surfaces are chrome-plated to prevent rust.
It has a winged piston to fix the swivel position of the base.
Another larger piston is used to open or close the jaws according to the dimensions or shape of the workpiece to be clamped. Allows smooth opening and closing without damaging the workpiece.
There is a chrome-plated surface that can be used for hammering as if it were a small anvil.
The jaws feature jaw plates to avoid damaging the workpiece.
The jaws cover width ranges of 80, 100, 125 and 150 mm, depending on the model.
It has a swivel base, which allows it to be bolted to the workbench and the bolt can be rotated 360 degrees.
The vice is made of steel, and is largely painted.
The most used surfaces are chrome-plated to prevent rust.
It has a winged piston to fix the swivel position of the base.
Another larger piston is used to open or close the jaws according to the dimensions or shape of the workpiece to be clamped. Allows smooth opening and closing without damaging the workpiece.
There is a chrome-plated surface that can be used for hammering as if it were a small anvil.
The jaws feature jaw plates to avoid damaging the workpiece.
The jaws cover width ranges of 80, 100, 125 and 150 mm, depending on the model.
| Product | Availability | Width (in mm) |
|
|---|---|---|---|
| 100 MM UTILITY BENCH VICE HR Code 171010 Technical documentation | High level | 100 | |
| 125 MM UTILITY BENCH VICE HR Code 171015 Technical documentation | High level | ||
| 150 MM UTILITY BENCH VICE HR Code 171020 Technical documentation | High level | 150 | |
| 80 MM UTILITY BENCH VICE HR Code 171005 Technical documentation | High level | 80 |
Related products
Metal Jaws For Bench Vice ALYCO
Metal jaws for bench vice, 150 mm. Compatible with Alyco bench vice with square guide 199315.
Metal Jaws For Bench Vice ALYCO
Metal jaws for bench vice, 150 mm. Compatible with Alyco bench vice with square guide 199315.
Rubber Jaws For Bench Vice ALYCO
Pack of two rubber interchangeable jaws for bench vice, 150 mm. Compatible with Alyco bench vice with round guide 199360 and Alyco bench vice with square guide 199315
Metal Jaws For Bench Vice ALYCO
Metal jaws for bench vice, 150 mm. Compatible with Alyco bench vice with square guide 199315.
Bench Vice ALYCO
Bench vice
Metal Jaws For Bench Vice ALYCO
Metal jaws for bench vice, 125 mm. Compatible with Alyco bench vice with round guide 199355.
drill vice ALYCO
Manual drill vice, designed to clamp and handle workpieces safely and precisely.